一English

download gimp 2.10 . Easily edit with GIMP training tutorial 10

キッズラボへようこそ!@Createkidslab

In addition to layout to read the parts in GIMP, anyone easy to make a three-dimensional image!
Simply place to download the parts, super easy!
Since the part to show the three-dimensional can be made to appear three-dimensionally in the only shade romp even a beginner because only arrange the parts!

This difficulty ★★★★★

By editing using the Style-Tool of the parts, you remember fun how to use GIMP.
If you are a beginner, I think from the experience the first time is good.

gimpトレーニングパーツの使い方 初心者でも簡単テンプレート01GIMPにパーツを読み込みレイアウトするだけで、立体的な画像を誰でも簡単に作れます! パーツをダウンロードして配置するだけ、超簡単! ...

This time, try to produce the appearance of the house.

The Style-Tool of the parts?

Style-Tool of parts, contains the material required for each work.
Just go side-by-side to adjust the size of the material.
Finally, and continue to place the shadow, plane picture becomes three-dimensional.

As GIMP training, also I thought that if Re assist you as a work production.

Editing software such as GIMP “Do I get made fun and easy to remember is, as in”was prepared in feeling that.

In addition, if Style-Tool of the parts have to resale or distribution, you can safely use it as a commercial and works!

The video you are using parts of the Style-Tool10 in GIMP

Production method please refer to in the video.

Kids-kun

Fine work, after all pentabutyrate is I’m necessities!

Prepare the Style-Tool of parts

「Style-Tool-10」parts purchase

Using the material, just go with the shadow, creating a three-dimensional shelf.
You can also easily challenge for beginners.
But please try to challenge to prepare the “Style-Tool-10” parts!
When ☟ be purchased from here, you can download parts.





Style-Tool of parts content

“Style-Tool-10” in the folder “Style-Tool-10.xcf” to open the GIMP file.
But please be pre-installed in the free software GIMP ※.

GIMP2.10.4 日本語化 ダウンロードと無料画像編集ソフトの使い方GIMPはおすすめ! サイトやブログで写真を加工したり、バナーを制作するときに便利な画像編集ソフトGIMPを知ってますか?  GIMP...
Open the parts of the style-tool in GIMP
  1. It created by placing the parts in the white campus of here.
  2. Here is “Layer” is referred to as.
    Necessary parts have been already prepared.
  3. Layers are displayed centerpiece mark comes with. Since the non-visible layers is off the eyeball mark, click to display in.

Using the Style-Tool in GIMP

Production to display the image of BACK
  1. “BACK.jpg” and select Display the background layer.
  2. The image of the background “Scale” tool Shift + S to expand arranged in a campus full of press “Enter”.

※ layers stacking order will continue to overlap each other from the bottom to the top.

Prepare the outer wall of the house

The outer wall of the house
  1. “011.png” Select display the layer.
  2. The outer wall material “Scale” tool Shift + S established a size and place it in the above-mentioned position.
    When moving, you can be moved by dragging the square in the center of the material.

Placing the second floor

Production of the second floor
  1. “1.png” and then select display the layer.
  2. The second floor “Scale” tool Shift + S established a size and place it in the above-mentioned position.
    Width can be adjusted for the first floor.

The arrangement of windows and sash

The arrangement of windows and sash
  1. The arrangement of windows and sash
    1. “1.png # 2” display select the layer the second floor left side of the sash to.
    2. Select Show “3.png” Layer 1 floor right side of the sash with. Since the living room of the sash is slightly larger. Spaced between slightly from the ground. Place the concrete of the foundation later.
    3. Select Show “4.png” layer and place as the first floor of the foyer. Please wear on the ground.
    4. Select Show “18.png” layer and place as the first floor entrance next to the small window.
    5. Select Show “10.png” layer and place on the second floor of the right-hand side.
    6. Select Show “11.png” layer and place as the second floor of a small window.

    “Scale” tool Shift + S and trimmed the size of each part in and place it in the above-mentioned position.
    Always “Enter” After placing it, please press the!

Placement of the foundation, roof deck, garage

Placement of the foundation, roof deck, garage
  1. Select Show “031.png” layer and place the first floor of the base part.
  2. Select Show “054.png” layer to place the roof was.
    “Scale” tool and the “Perspective” before the tool will spread slightly.
  3. 「051.png」レイヤーを表示選択して屋根の厚みを付けます。
  4. 「55.png#1」レイヤーを表示選択して2階のサッシ下にデッキを配置します。
  5. 「55.png#2」レイヤーを表示選択して2階のサッシ上に軒先を配置します。
  6. 「1.png#3」レイヤーを表示選択して2階のサッシに柵を配置します。
  7. 「55.png」レイヤーを表示選択して2階右側にデッキを配置します。
  8. 「1.png#1」レイヤーを表示選択して2階のデッキに柵を配置します。
  9. 「30.png」レイヤーを表示選択して1階の右側にデッキを配置します。
  10. 「5.png」レイヤーを表示選択して煙突を屋根に配置します。
  11. 「50.png」レイヤーを表示選択してガレージを配置します。
    家の屋根にかぶせると奥行き感が出ます。
  12. 「44.png」レイヤーを表示選択して砂利をガレージに配置します。
    「拡大・縮小」ツールと「遠近法」ツールでガレージの柱に合わせて配置します。

「拡大・縮小」ツール Shift+Sで各パーツのサイズを整えて上記位置に配置します。
配置したら必ず「Enter」を押して確定してくださいね!

The arrangement of the tree planting, fence symbol tree

  1. Select Show “23.png” layer and place it in the front door next to you. It feels to wear to the front door and a small window I get depth.
  2. Select Show “27.png” layer and place the fence in front of the house.
  3. Select Show “22.png” layer and place the symbol tree.

“Scale” tool Shift + S and trimmed the size of each part in and place it in the above-mentioned position.
Always “Enter” After placing it, please press the!

To three-dimensional shaded

To three-dimensional shaded
  1. Select Show “12.png” layer and place the shadow of the garage on top of the gravel.
    “Scale” tool and the “Perspective” right to adjust the natural placement in the tool.
  2. Select Show “5.png # 1” layer and place the shadow of the first floor of the right side deck.
  3. Select Show “45.png” layer in place by shifting the shadow of the entrance before planting.
  4. “44.png # 1” display select the layer and to match the root beneath the symbol tree and adjust so that the natural arrangement.
  5. Select Show “2.png” layer and place the shadow under the first floor roof. And the width of the wall.
  6. “2.png # 1” layer display select the to place the shadow under the second floor deck.
  7. “2.png # 2” layer display select the to place the shadow under the eaves on the second floor deck.
  8. “2.png # 3” layer display select the to be to slightly larger arranged in a felt covering on the second floor of the landscape of the window, the window will issue a feeling in the back from the wall.
  9. “2.png # 4” the layer display selection to place the shadow of the second floor of the roof.
    “Scale” tool and the “perspective” should be placed and adjusted to obliquely in the tool.

“Scale” tool Shift + S and trimmed the size of each part in and place it in the above-mentioned position.
Always “Enter” After placing it, please press the!

Complete

It was completed
Kids-kun
Kids-kun
It’s a good feeling ♪ GIMP has become more and more fun!

Work and learn the shortcut key is smooth!
· “Scale” tool Tasu S Shift
, “Perspective” tool Shift + P