一English

download gimp 2.10 . Easily edit with GIMP training tutorial 11

キッズラボへようこそ!@Createkidslab

In addition to layout to read the parts in GIMP, anyone easy to make a three-dimensional image! 
Simply place to download the parts, super easy!
Since the part to show the three-dimensional can be made to appear three-dimensionally in the only shade romp even a beginner because only arrange the parts!

This difficulty ★★★★

This time, to create the room. Some of the room created in the one-point perspective.

Have you ever heard of one-point perspective view?
If you think that you know well that is your job and your study of the interior coordinator and building relationships.

One-point perspective is a technique to become a three-dimensional by writing a figure to match the line of radially extending from a single point.

By editing using the Style-Tool of parts, also remember fun and how to use the GIMP, you might must for those interested in the interior coordinator can also create a perspective drawings.
If you are a beginner, I think from the experience the first time is good.

gimpトレーニングパーツの使い方 初心者でも簡単テンプレート01GIMPにパーツを読み込みレイアウトするだけで、立体的な画像を誰でも簡単に作れます! パーツをダウンロードして配置するだけ、超簡単! ...

This time, try to work in the room.

The Style-Tool of the parts?

Style-Tool of parts, contains the material required for each work.
Just go side-by-side to adjust the size of the material.
Finally, and continue to place the shadow, plane picture becomes three-dimensional.

As GIMP training, also I thought that if Re assist you as a work production.

Editing software such as GIMP “Do I get made fun and easy to remember is, as in”was prepared in feeling that.

In addition, if Style-Tool of the parts have to resale or distribution, you can safely use it as a commercial and works!

The video you are using parts of the Style-Tool11 in GIMP

Production method please refer to in the video.

Kids-kun
Kids-kun
Let’s do it together align the parts!

Fine work, after all pentabutyrate is I’m necessities!

Prepare the Style-Tool of parts

「Style-Tool-11」Style-Tool-11

Using the material, just go with the shadow, creating a three-dimensional shelf.
You can also easily challenge for beginners.
But please try to challenge to prepare the “Style-Tool-11” parts!
When ☟ be purchased from here, you can download parts.





Style-Tool of parts content

“Style-Tool-11” in the folder “Style-Tool-11.xcf” to open the GIMP file.
But please be pre-installed in the free software GIMP ※.

GIMP2.10.4 日本語化 ダウンロードと無料画像編集ソフトの使い方GIMPはおすすめ! サイトやブログで写真を加工したり、バナーを制作するときに便利な画像編集ソフトGIMPを知ってますか?  GIMP...
Open the parts of the style-tool in GIMP
  1. It created by placing the parts in the white campus of here.
  2. Here is “Layer” is referred to as.
    Necessary parts have been already prepared.
  3. Layers are displayed centerpiece mark comes with. Since the non-visible layers is off the eyeball mark, click to display in.

Using the Style-Tool in GIMP

One-point perspective

 

  1. To display select the layer “Scale” tool Shift + S and place it in the campus.
  2. The inside of the room is ” to place the parts using one-point perspective”.
    To radiation extending from the vanishing point of the center Align by deforming the horizontal line.
    All vertical line will be vertical.

※ layers stacking order will continue to overlap each other from the bottom to the top.

Place the wall of the room

To display Select the layer disposed on the campus in the "Scale" tool Shift + S
  1. “2.png” Select display the layer.
  2. The wall material “Scale” tool Shift + S and place it in the whole size.
    When moving, you can be moved by dragging the square in the center of the material.

Always “Enter” After placing it, please press the!

Place the floor

Place the floor
  1. “16.png” Select display the layer.
  2. The floor material “Scale” tool Shift + S to place the size at the height of about one-third.

Always “Enter” After placing it, please press the!

Inside the room, ” one-point perspective.”

Inside of the room is arranged in a "one-point perspective."
  1. “1.png # 3” and then select display the layer.
  2. To radiation extending from the vanishing point of the center by deforming the horizontal line and align the upper and lower side of the wall.
    “Scale” tool and the “perspective” should be placed and adjusted to obliquely in the tool.
  3. All vertical line will be vertical.
  4. And arranged so as to match the blue frame.

Always “Enter” After placing it, please press the!

Place the walls and ceiling

Lateral wall, place the vertical wall
  1. ” 1.png # 3″ layer “1.png # 4” layer “1.png # 5” display and select the layer.
  2. “1.png # 3” layer is placed to the left wall to match the red frame
  3. “1.png # 4” layer is placed left and right wall to match the green frame
  4. “1.png # 5” layer is placed a ceiling to match the blue frame

“Scale” tool and the “perspective” should be placed and adjusted to obliquely in the tool.
Always “Enter” After placing it, please press the!

Place a sash at the back of the wall

Place a sash at the back of the wall
  1. “22.png” Select display the layer.
  2. The sash in the back of the wall , “Scale” tool Shift + S and place it in.

Place was adjusted to obliquely in the “Scale” tool and the “Perspective” tool.
Always “Enter” After placing
 it, please press the!

Place the sash of the lateral wall

Place the sash of the lateral wall
  1. “2.png # 3” and then select display the layer.
  2. Align to radiation in the direction of the lateral wall.
    “Scale” tool and the “perspective” should be placed and adjusted to obliquely in the tool.
    The inversion of the image layers, “Layers” ⇒ “deformation” ⇒ “horizontal inversion” is possible any time.
    ※ left wall sash, flips. Please refer to the video reference.

Always “Enter” After placing it, please press the!

The arrangement of the kitchen

The front part arrangement of the kitchen
  1. “21.png” Select display the layer.
  2. You up and down the front part of the kitchen in the form of a blue frame and aligned with the radiation. Both sides are vertical.

Always “Enter” After placing it, please press the!

Side arrangement of the kitchen
  1. “22.png # 1” and then select display the layer.
  2. Place on the side of the kitchen.

Always “Enter” After placing it, please press the!

The arrangement of the ventilation fan
  1. “48.png” Select display the layer.
  2. Place the ventilation fan on top of the stove.
    “Scale” tool and the “perspective” should be placed inverted in the tool.
    The inversion of the image layers, “Layers” ⇒ “deformation” ⇒ “horizontal inversion” is possible any time.
    Please refer to the video reference ※.

Always “Enter” After placing it, please press the!

Shelf placed on the kitchen
  1. “24.png”, “23.png”, “23.png # 1” and then select display the layer.
  2. “24.png” layer is the front of the blue frame “23.png” layers red frame of the side “23.png # 1” layer should be placed in the green frame of the bottom.

Always “Enter” After placing it, please press the!

A small window of the kitchen
  1. “5.png” Select display the layer.
  2. The small window of the kitchen like a red frame “perspective” Align tool.

Always “Enter” After placing it, please press the!

Faucet and lighting
  1. “46.png” layer and “53.png # 1” and then select display the layer.
  2. “46.png” to place the faucet on top of the kitchen.
  3. “53.png # 1” layer is the lighting for the living.
    “Scale” tool Shift + S to place to adjust the size.

Always “Enter” After placing it, please press the!

A three-dimensional shaded

A three-dimensional shaded
  1. “1.png” and then select display the layer.
  2. Place a shadow on the joint portion of the ceiling of the back of the wall. Always “Enter” After placing it, please press the!

“Scale” tool Shift + S to place to adjust the size.
Please be Tsukekata of the shadow is a sample video as a reference.

Add a shadow in the corner of the ceiling
  1. “1.png # 1”, “1.png # 2” display and select the layer.
  2. “1.png # 1,” the shadow of the layer and place it in the boundary between the left side of the ceiling.
  3. “1.png # 2,” the shadow of the layer and place it in the boundary between the right side of the kitchen shelf.

Place was adjusted to obliquely in the “Scale” tool and the “Perspective” tool.
Always “Enter” After placing
 it, please press the!

Hidamari of sunshine coming through the window

Place the Hidamari on the floor
  1. “28.png”, “28.png # 1” display to select the layer.
  2. “28.png” in the white blur of layer to produce a hidamari of sunlight that plugs from the back of the window on the floor.
  3. “28.png # 1” in the white blur of layer to produce a hidamari of sunlight that plugs from the left side of the window on the floor.

Always “Enter” After placing it, please press the!

Set the interior in the living room

Place the sofa set in the living room
  1. “44.png” Select display the layer.
  2. “44.png” to place the sofa set of layers near the back of the window.

Always “Enter” After placing it, please press the!

Arrange the lighting and table set
  1. “45.png”, “51.png” Select display the layer.
  2. “45.png” to place a table set of layers.
  3. “51.png” to place the pendant light layer on top of the table.

Always “Enter” After placing it, please press the!

Completed in the room

Completed in the room

It is completed When you hide the “one-point perspective view” layer.

How is it, only match the line of “one-point perspective view” layer, you can image the creation of one-point perspective .

You can handy representation of the image in such a time and easily you presented to the customer in person or work, which is the study of the interior.

Once you have prepared a part in the GIMP, you can perspective drawings are created in a variety of combinations.

Kids-kun
Kids-kun
♪ I parts are original also put yourself

Please comment Follow us on Twiiter and Facebook If you like parts of GIMP & Style-Tool!